Sinclair QL Instrukcja Obsługi Pobierz pdf (Strona 14)

3.1.4 Insert a blank tape cartridge into MDV2 as requested.

3.2 Colour Test

3.2.1 After the message to load a blank cartridge into MDV2 is displayed, both screens should clear and then display the following colour test card.

NOTE: On each colour bar the word 'Test' should be written 8 times, once in each of the following colours from top to bottom Black - Blue - Red

- Magenta - Green - Cyan - Yellow - White

3.2.2 Check that the colours on the monitor are the same as those on the TV; check that the flashing text is satisfactory; type OK to proceed.

3.3 Sound Test

3.3.1 Check that the following is displayed:

3.3.2 After hearing two cycles of trimphone followed by the low pitch tone, type OK to continue.

3.4 Network Test

3.4.1 Check that the following is momentarily displayed:

Network test : OK

3.5 RS232C Loopback Test

3.5.1 Check that the following is displayed:

3.5.2 Connect the loopback cable in the QL's SER1 and SER2 sockets and press the space bar; the following message should be temporarily

displayed:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 44 45

Brak uwag

Sinclair QL Instrukcja Obsługi Strona 14